AS 4145.5:2011
$49.40
Locksets and hardware for doors and windows – Controlled door closing devices (EN 1154:1997, MOD)
| Published By | Publication Date | Number of Pages |
| AS | 2011-12-22 | 45 |
This standard specifies requirements for controlled door closing devices for swing doors, such devices being mounted on or in the frame, on or in the door, or in the floor.
The scope is limited to manually operated door closing devices where the energy for closing is generated by the user upon opening the door, such that when the door is released, it returns to a closed position, in a controlled manner.
Devices such as spring hinges, which do not exert a checking control during door closing, are outside the scope of this standard.
Door closing devices (door closers) manufactured in accordance with this standard are recommended for use wherever there is a requirement for reliable closing control of a door.
Door closers for use on fire/smoke doors need additional attributes in order to contribute actively to meeting the essential safety requirements in case of fire, either independently or as part of a complete door
assembly.
These additional requirements for door closers for use on a fire/smoke door assembly are specified in normative Annex A.
Door closers incorporating electrically powered hold-open mechanisms, for use on fire/smoke door
assemblies, are covered by EN 1155.
Door closers incorporating door coordinator devices (with or without electrically powered hold-open devices) are covered by EN 1158.
Related products
-
ACI 445.2 2021
ACI PRC-445.2-21: Strut-and-Tie Method Guidelines for ACI 318-19 – Guide Published By Publication Date Number…
-
ISO 14595:2014
Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials…
-
IEEE 45.5 2014
IEEE Recommended Practice for Electrical Installations on Shipboard — Safety Considerations Published By Publication Date…
-
AS 1145.3:2001
Determination of tensile properties of plastics materials – Test conditions for films and sheets Published…
-
BS EN ISO 14555:2017
Welding. Arc stud welding of metallic materials Published By Publication Date Number of Pages BSI…
-
BS EN 14535-2:2019
Railway applications. Brake discs for railway rolling stock – Brake discs mounted onto the wheel,…
-
AS 1145.4:2001
Determination of tensile properties of plastics materials – Test conditions for isotropic and orthotropic fibre-reinforced…
-
AS/NZS 4645.2:2018
Gas distribution networks – Steel pipe systems Published By Publication Date Number of Pages AS…
-
BS EN 14595:2016
Tanks for transport of dangerous goods. Service equipment. Breather device Published By Publication Date Number…
-
BS EN 14535-2:2011
Railway applications. Brake discs for railway rolling stock – Brake discs mounted onto the wheel,…
-
AS 4145.3:2001 (R2018)
Locksets – Mechanical locksets for windows in buildings Published By Publication Date Number of Pages…
-
ISO 14505-4:2021
Ergonomics of the thermal environment – Evaluation of thermal environments in vehicles – Part 4:…
-
AS 5144.5:2015
Industrial trucks – Safety requirements and verification – Pedestrian-propelled trucks Published By Publication Date Number…
-
BS EN ISO 14585:2011
Hexalobular socket pan head tapping screws Published By Publication Date Number of Pages BSI 2011…
-
AS 4685.5:2021
Playground equipment and surfacing – Additional specific safety requirements and test methods for carousels (EN…
-
ASHRAE Standard 145.1 2015
ASHRAE Standard 145.1-2015 — Laboratory Test Method for Assessing the Performance of Gas-Phase Air-Cleaning Systems:…
-
BS EN 14535-3:2015:2016 Edition
Railway applications. Brake discs for railway rolling stock – Brake discs, performance of the disc…
-
AS/NZS 4645.3:2018
Gas distribution networks – Plastics pipe systems Published By Publication Date Number of Pages AS…
-
AS/NZS 4645.1:2018
Gas distribution networks – Network management Published By Publication Date Number of Pages AS 2018-02-28…
-
BS ISO 14505-4:2021:2022 Edition
Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles – Determination of the…
-
IEEE ISO IEC 14575 2001
ISO/IEC 14575:2000 (IEEE Std 1355-1995) Information Technology — Microprocessor systems — Heterogeneous InterConnect (HIC) (Low-Cost,…
-
BS EN ISO 14555:2014
Welding. Arc stud welding of metallic materials Published By Publication Date Number of Pages BSI…
-
ISO 14535:2001
Photography — Room-light loading packages for electronic scanners and image-setting film and paper rolls —…
-
BS EN 14535-1:2019
Railway applications. Brake discs for railway rolling stock – Brake discs pressed or shrunk onto…
-
BS EN 14565:2019 – TC:2020 Edition
Tracked Changes. Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification Published By…
-
AS 4685.5:2014
Playground equipment and surfacing – Additional specific safety requirements and test methods for carousels (EN…
-
BS ISO 14535:2001
Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and…
-
BS ISO 14595:2014
Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs) Published…
-
AS 1145.2:2001
Determination of tensile properties of plastics materials – Test conditions for moulding and extrusion plastics…
-
AS 1145.1:2001
Determination of tensile properties of plastics materials – General principles Published By Publication Date Number…
-
AS 4747.5:2013
Meters for non-urban water supply-Installation and commissioning of closed conduit meters fully charged Published By…
-
ISO 14555:2017
Welding — Arc stud welding of metallic materials Published By Publication Date Number of Pages…
-
AS 1145.5:2001
Determination of tensile properties of plastics materials – Test conditions for fibre-reinforced plastic composites Published…
-
AS 4176.5:2010
Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold water plumbing…
-
BS EN 14565:2019
Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification Published By Publication Date…
-
ISO 14555:2014
Welding — Arc stud welding of metallic materials Published By Publication Date Number of Pages…
-
ASHRAE 145.2 2016
ASHRAE Standard 145.2-2016 — Laboratory Test Method for Assessing the Performance of Gas-Phase Air Cleaning…
-
ASME Y14.5 2018
ASME Y14.5 – 2018: Dimensioning and Tolerancing Published By Publication Date Number of Pages ASME…
-
ISO 14585:2011
Hexalobular socket pan head tapping screws Published By Publication Date Number of Pages ISO 2011-02…
-
BS EN 14595:2016 – TC:2020 Edition
Tracked Changes. Tanks for transport of dangerous goods. Service equipment. Breather device Published By Publication…
