ASTM-A564 2010

$40.63

A564/A564M-10 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

Published By	Publication Date	Number of Pages
ASTM	2010	7

Guaranteed Safe Checkout

Categories: 77.140.60 - Steel bars and rods, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM A564/A564M-10

Historical Standard: Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

ASTM A564/A564M

Scope

1.1 This specification covers bars and shapes of age-hardening stainless steels. Hot-finished or cold-finished rounds, squares, hexagons, bar shapes, angles, tees, and channels are included; these shapes may be produced by hot rolling, extruding, or forging. Billets or bars for reforging may be purchased to this specification.

1.2 These steels are generally used for parts requiring corrosion resistance and high strength at room temperature, or at temperatures up to 600°F [315°C]; 700°F [370°C] for Type 632; 840°F [450°C] for Type UNS S46910. They are suitable for machining in the solution-annealed condition after which they may be age-hardened to the mechanical properties specified in Section 7 without danger of cracking or distortion. Type XM-25 is machinable in the as-received fully heat treated condition. Type UNS S46910 is suitable for machining in the solution-annealed, cold-worked, and aged-hardened condition.

1.3 Types 631 and 632 contain a large amount of ferrite in the microstructure and can have low ductility in forgings and larger diameter bars. Applications should be limited to small diameter bar.

1.4 The values stated in either inch-pound units or SI (metric) units are to be regarded separately as standards; within the text and tables, the SI units are shown in [brackets]. The values stated in each system are not exact equivalents; therefore, each system must be used independent of the other. Combining values from the two systems may result in nonconformance with the specification.

Keywords

age-hardening stainless steel; precipitation hardening stainless steel; stainless steel bars; stainless steel shapes; Age-hardening alloys–specifications; Cold-finished steel bars–specifications; Corrosive service applications–bars/rods/shapes; High-temperature service applications–steel bars; Hot-rolled stainless steel bars–specifications; Precipitation-hardening metals/alloys–specifications; Stainless steel bars/billets–specifications; Steel bars and shapes–specifications; Steel bars/shapes/wires; Udimet alloy

ICS Code

ICS Number Code 77.140.60 (Steel bars and rods)

DOI: 10.1520/A0564_A0564M-10

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents Ordering Information
2	General Requirements Materials and Manufacture Chemical Composition Mechanical Properties Requirements TABLE 1
3	Number of Tests TABLE 2 TABLE 3
4	TABLE 4
7	Keywords

Additional information

Standard Title	A564/A564M-10 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
Published Code	ASTM
Publication Date	2010
Pages Count	7
ICS Codes	77.140.60 - Steel bars and rods