ASTM-D5188:2009 Edition

$40.63

D5188-09 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)

Published By	Publication Date	Number of Pages
ASTM	2009	5

Guaranteed Safe Checkout

Categories: 75.160.20 - Liquid fuels, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM D5188-09

Historical Standard: Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)

ASTM D5188

Scope

1.1 This test method covers the determination of the temperature at which the vapor formed from a selected volume of volatile petroleum product saturated with air at 0 to 1°C (32 to 34°F) produces a pressure of one atmosphere in an evacuated chamber of fixed volume. This test method is applicable to samples for which the determined temperature is between 36 and 80°C (97 and 176°F) and the vapor-liquid ratio is between 8 to 1 and 75 to 1.

Note 1—When the vapor-liquid ratio is 20:1, the result is intended to be comparable to the results determined by Test Method D 2533.

Note 2—This test method may also be applicable at pressures other than one atmosphere, but the stated precision may not apply.

1.2 This test method is applicable to both gasoline and gasoline-oxygenate blends.

1.2.1 Some gasoline-oxygenate blends may show a haze when cooled to 0 to 1°C. If a haze is observed in 11.5, it shall be indicated in the reporting of results. The precision and bias statements for hazy samples have not been determined (see Note 9).

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are provided for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warnings, see 7.2 and 8.1.1.

Keywords

gasoline; gasoline-oxygenate blends; petroleum products; T_{(V/L = 20)}; vapor-liquid ratio; Air saturation; Evacuated chamber method; Fuel oils; Petroleum samples; Phase separation; Temperature tests–petroleum products; Vapor-liquid (V/L) ratio

ICS Code

ICS Number Code 75.160.20 (Liquid fuels)

DOI: 10.1520/D5188-09

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents Terminology Summary of Test Method Significance and Use Apparatus
2	Reagents and Materials Sampling
3	Preparation of Apparatus Calibration Procedure
4	Calculations Report Precision and Bias Keywords

Additional information

Standard Title	D5188-09 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
Published Code	ASTM
Publication Date	2009
Pages Count	5
ICS Codes	75.160.20 - Liquid fuels