IEEE C57.104-2019
$60.67
IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers
| Published By | Publication Date | Number of Pages |
| IEEE | 2019 |
Revision Standard – Active. Detailed procedures for interpreting Dissolved Gas Analysis results are described in this guide. The document details: 1) Overview of gas generation in transformer and DGA process; 2) The purpose and application of DGA; 3) DGA quality verification and DGA limitations; 4) DGA interpretation and norms; 5) Fault type definitions and identification; 6) Case studies and interpretation example. The intent is to provide the operator with useful information concerning the serviceability of the equipment. An extensive bibliography on gas evolution, detection, and interpretation is included.
Related products
-
IEEE C57.130 2016
IEEE Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests…
-
IEEE C57.104 2019
IEEE Approved Draft Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers Published By…
-
IEEE C57.142-2010
IEEE Guide to Describe the Occurrence and Mitigation of Switching Transients Induced by Transformers, Switching…
-
IEEE C57.104-2019(Redline)
IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers (Redline) Published By…
-
IEEE C57.105 2019
IEEE Approved Draft Guide for Application of Transformer Connections in Three-Phase Electrical Systems Published By…
-
IEEE C57.154-2012
IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers…
-
IEEE C57.109 2018
IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration Published By Publication Date Number of Pages IEEE…
-
IEEE C57.150 2013
IEEE Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher…
-
IEEE C57.142 2011
IEEE Guide to Describe the Occurrence and Mitigation of Switching Transients Induced by Transformers, Switching…
-
IEEE C37.104 2012
IEEE Guide for Automatic Reclosing of Circuit Breakers for AC Distribution and Transmission Lines Published…
-
IEEE C57.19.04-2018
IEEE Standard for Performance Characteristics and Dimensions for High Current Power Transformer Bushings with Rated…
-
IEEE C57.134 2014
IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers Published By Publication Date Number…
-
IEEE C57.104-2019(Redline)
IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers (Redline) Published By…
-
IEEE C57.105-2019(Redline)
IEEE Guide for Application of Transformer Connections in Three-Phase Electrical Systems (Redline) Published By Publication…
-
IEEE C57.105-2019
IEEE Guide for Application of Transformer Connections in Three-Phase Electrical Systems Published By Publication Date…
-
IEEE C57.116-2014
IEEE Guide for Transformers Directly Connected to Generators Published By Publication Date Number of Pages…
-
IEEE C57.104-2019
IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers Published By Publication…
-
IEEE C57.100 2012
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power…
-
IEEE C57.147-2018
IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers Published By…
-
IEEE C57.104 2009
IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers Published By Publication Date…
-
IEEE C57.154 2012
IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers…
-
IEEE C57.131-2012
IEEE Standard Requirements for Tap Changers Published By Publication Date Number of Pages IEEE 2012
-
IEEE C57.140 2017
IEEE Guide for Evaluation and Reconditioning of Liquid Immersed Power Transformers Published By Publication Date…
-
IEEE C57.143-2012
IEEE Guide for Application for Monitoring Equipment to Liquid-Immersed Transformers and Components Published By Publication…
-
IEEE C57.106 2016
IEEE Guide for Acceptance and Maintenance of Insulating Mineral Oil in Electrical Equipment Published By…
-
IEEE C57.148 2012
IEEE Standard for Control Cabinets for Power Transformers Published By Publication Date Number of Pages…
-
IEEE C57.110-2018
IEEE Recommended Practice for Establishing Liquid Immersed and Dry-Type Power and Distribution Transformer Capability when…
-
IEEE C57.163 2015
IEEE Guide for Establishing Power Transformer Capability while under Geomagnetic Disturbances Published By Publication Date…
-
IEEE C57.131-2012
IEEE Standard Requirements for Tap Changers (Superseded Redline) Published By Publication Date Number of Pages…
-
IEEE C57.139 2016
IEEE Guide for Dissolved Gas Analysis in Transformer Load Tap Changers Published By Publication Date…
-
IEEE C57.138 2016:2017 Edition
IEEE Recommended Practice for Routine Impulse Tests for Distribution Transformers Published By Publication Date Number…
-
IEEE C57.147-2018(Redline)
IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers (Redline) Published…
-
IEEE C57.156 2016
IEEE Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors Published By Publication…
-
IEEE C57.154-2012
IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers…
-
IEEE C57.135 2011
IEEE Guide for the Application, Specification, and Testing of Phase-Shifting Transformers Published By Publication Date…
-
IEEE C57.110 2018
IEEE Recommended Practice for Establishing Liquid Immersed and Dry-Type Power and Distribution Transformer Capability when…
-
IEEE C37.105-2010
IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations…
-
IEEE C57.105-2019(Redline)
IEEE Guide for Application of Transformer Connections in Three-Phase Electrical Systems (Redline) Published By Publication…
-
IEEE C57.120 2017
IEEE Guide for Loss Evaluation of Distribution and Power Transformers and Reactors Published By Publication…
-
IEEE C57.100-2011
IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power…
